Download Manual

  • 4096 levels 0-100% dimming smoothly without any ash.
  • Match with RF 2.4G single zone or multiple zone dimming remote control.
  • One RF controller accept up to 10 remote control.
  • Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
  • Synchronize on multiple number of controllers.
  • Connect with external push switch to achieve on/off and 0-100% dimming function.
  • Logarithmic or linear dimming curve selectable.
  • PWM frequency 500Hz, 2kHz, 8kHz or 16kHz selectable.
  • Over-heat / Over-load / Short circuit protection, recover automatically.
  • Light on/off fade time 3s selectable.

Match Remote Control (two match ways)

Use the controller’s Match key

  • Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful.
  • Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

  • Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
  • Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Push Dim Function:

  • Push Dim Function ● Short press: Turn on or off light. ● Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction. ● Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure. ● Synchronization: If more than one controller are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 meters.

Light On/Off Fade Time

  • Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Light on/off fade time Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.
Technical Parameters

Input and Output
  • Input voltage - 12-48V DC
  • Output voltage - 12-48V DC
  • Input current - 15A@12/24V  -  10A@36/48V
  • Output Power - 180W@12V - 360W@24V - 360W@36V - 480W@48V
  • Output Type - Constant Voltage
  • Scenario Mode - 44 default and 10+ customizations
Dimming Data
  • Input Signal - RF 2.4GHz + Push Dim
  • Control Distance - 30m(Barrier-free space
  • Dimming Gray Scale - 4096 (2^12) levels
  • Dimming Range - 0 -100%
  • Dimming Curve - Logarithmic or linear
  • PWM Frequency - 500Hz, 2kHz, 8kHz, 16kHz
Environment
  • Operation temperature - Ta: -30OC ~ +55OC
  • Case temperature (Max.) - T c:+65 C
  • IP rating - IP20
  • Warranty - 5 years
  • Certification - CE,EMC,LVD,RED
  • Size - L120 x W43 x H35mm